20 Ton Punch Capacity, 27 Stations, 3 x Auto Index Stations
Thick Turret Design
Full AMADA History & Current Maintenance Contract
Year: 2005
X Axis 1270mm
Y Axis 1270mm
Max Workpiece 1300mm x 2540mm (including 1 reposition)
800 Strokes per minute
Complete with Side Extension Roller Tables Included (x2)
Weight 11 tons
Under Power
N.B. There are no loading facilities onsite for this Lot!
100 Ton x 3000mm Over Bed Downstroke Hydraulic CNC Press Brake
With Amada CD - 4 Axis Control (Y1, Y2, X, R) / 2 x Manual Z Fingers
Year: 2001
2700mm Between Frames
Including Full Length 30 deg Top Tools & Twin Vee Bottom Tools (12mm & 8mm)
Quick Release Euro Top Tool Clamping.
Machine Mounted Erwin Sick Infra-Red Safety Guards & Rear Safety Fence
Full AMADA History & Current Maintenance Contract
Under Power
N.B. There are no loading facilties on site for this Lot
3000mm x 6mm Capacity
Power Back Gauge
Rapid Blade Gap Adjustment
Adjustable Stroke Length
3 x Front Supports, 1 x Standard Squaring Arm, 1 x Adjustable Angle Squaring Arm (0 – 60 degrees both directions)
Year: 1986
Under Power
N.B. There are no loading facilities onsite for this Lot!
Punch – 22mm thru 15mm / 38mm thru 8mm.
Shear – 200mm x 15mm / 300mm x 12mm
Angle – 100mm x 100mm x 10mm
Round Bar – 30mm
Square Bar – 25mm
Notching – 75mm x 35mm x 8mm
Year: 2004
Complete with a selection of Punches & Dies.
Double Mitre (60deg/45deg) Horizontal Bandsaw
258mm Rounds Section
320mm x 100mm Rectangles Section (Horizontal)
275mm x 230mm Rectangles Section (Vertical)
250mm Square Section
Including 3000mm Roller Track
Year: 2006
1270mm x 75mm Diameter
With Bottom Roll To Slip
Including 170mm Diameter Magnetic Chuck
Single Phase
Year: 2000
Please refer to PDF for tooling guide
Cabinets Included
3335mm – 23mm Hemming/Flattening Tools
3325mm – 20mm Radius Tools
2505mm - 20-60mm Neoprene Radius Tools
7400mm – 88 deg Goose Neck Tooling (R0.6) (.024) (32.874)
4100mm 10.10.88 deg Tools
Sheet Metal & Tube Deburring Machine
Under Power
76mm Belt Width Tube Notching Machine
Including 76mm, 50mm 30mm, 22mm Grinding Roll Dies
Year: 2004
Under Power
75mm Wide Belt Linishing Machine
Including Loeser Centreless Grinding/Polishing Attachment
Under Power
Pipe Threading Machine, including attachments
110V Power Supply
1000mm x 50mm Diameter
With Bottom Roll To Slip.
Maximum Capacity 363kgs
Maximum Height 4980mm
Year: 2014
90mm x 90mm Treadle Operated Corner Notcher
Double Mitre (60deg/45deg) Horizontal Bandsaw
258mm Rounds Section
320mm x 100mm Rectangles Section (Horizontal)
275mm x 230mm Rectangles Section (Vertical)
250mm Square Section
5000mm Roller Track
Year: 2015
Wheel Diameter 150mm = 25mm Wide
Speed 2500rpm
Single Phase
25mm Capacity Geared Head Drilling Machine with Manual Feed
Manual Table Adjustment, Table Size 400mm x 330mm
Speeds 125 – 2825 rpm
Year: 2016
110 Volt Transformer Extension Outlet with 6 Ports
15kva Treadle Operated Spot Welding Machine with 400mm Reach & Timer
400 Amp Mig Welder
Including Wire Feed, Torch & Earth Clamp (Gas Not Included)
Including 2 x 3 Jaw Chucks & 1 x 4 Jaw Chuck
24 Inch Between Centres
34 – 1500 rpm
Chuck Guard
This is for a Single Lot = 1 Chain Hoist
Including Pendant Control & Safety Latch Hook
x4 Available in Total - Please also see Lots 20.1, 20.2 and 20.3
This is for a Single Lot = 1 Chain Hoist
Including Pendant Control & Safety Latch Hook
x4 Available in Total - Please also see Lots 20, 20.2 and 20.3
This is for a Single Lot = 1 Chain Hoist
Including Pendant Control & Safety Latch Hook
x4 Available in Total - Please also see Lots 20, 20.1 and 20.3
This is for a Single Lot = 1 Chain Hoist
Including Pendant Control & Safety Latch Hook
x4 Available in Total - Please also see Lots 20, 20.1 and 20.2
Receiver Mounted Air Compressor with 900 litre tank
Year: 1998
1 x 3000mm & 1 x 2000mm – 400mm Wide Roller Track
Current Work Height 940mm Adjustable
Including ELGO Type Z16 Battery Powered Digital Length Stop
2 x 3000mm & 1 x 2000mm – 400mm Wide Roller Track
Current Work Height 750mm Adjustable
Including ELGO Type Z16 Battery Powered Digital Length Stop
5000mm – 18mm, 10mm, 6mm Square Hemming Deck
830mm - 150mm Vee
835mm – 100mm Vee
2915mm – 80mm Vee
3340mm – 50mm Vee
835mm – 32mm Vee
3340mm – 25mm Vee
415mm – 18mm Vee
3000mm – 25mm/15mm Twin Vee
110 Volt Transformer Extension Outlet with 5 Ports
1500cc Diesel
Colour: White
Mileage: 79,000
1 Owner from New
Full Service History
MOT valid until 23/08/23
Year: 2009 (59 Plate)
Colour: White
Mileage: 118,500
Number of Former Keepers: 1
MOT vald until 14/04/2023
2 Ton Lifting Capacity
Side Shift
Year: 2007
Hours: 1273
N.B. Collection Available 12th March 2023
Selection of 50mm Galvanized Hand Rail Fittings